Systems

IP Office 406 (Discontinued)

The Avaya IP Office 406 V2 control unit is a stackable unit with an optional 19" rack mounting kit. The IP Office 406 includes:

  • Eight Digital Station (DS) ports for selected 2400, 5400, 6400 and T3 Series phones plus 3810 wireless (US) phones
  • Two Analogue telephone ports
  • Eight 10/100 Mbps LAN Switched ports (Layer-2, unmanaged)
  • Support for optional embedded voicemail/auto-attendant (Compact Flash card)
  • 9-pin DTE Port (for maintenance or serial dongle connection for PC-less licensing)
  • X.21/V35 WAN interface
  • Support for 6 Expansion Modules
  • External output port containing two switches for door entry systems
  • Audio port for external music on hold source
  • 40 Data channels (Maximum 20 useable for Voicemail Pro)

A data channel is used whenever a call is made from the IP network to an exchange line (Central Office). For example, four people surfing the Internet will use a single data channel since they all share the same line to the ISP. Two people remotely accessing the Office LAN from home will use two data channels since they have dialled in on separate lines. IP extensions do not use data channels.

Optional internal upgrades allow for the support of up 12 x V.90 modem calls and a 4, 8, 16, 24 or 30-channel Voice Compression Module (VCM). The VCM module supports 4, 8, 16, 24 or 30 simultaneous Voice over IP sessions. These can be used for either providing networking between sites over a Wide Area Network or supporting IP Telephones and Soft phones. Typically an IP extension only uses a compression module channel when starting a
call and while on a call to a non-IP extension/line. It is possible to configure more IP extensions than the capacity of the installed VCM.

Through support of up to six external Expansion Modules, the Avaya IP Office 406 can be enhanced to support a mixture of analogue, digital or IP phones to maximum of 190 phones.

Avaya IP Office 406